Jonsbo D31 Mesh SC Micro ATX PC Case with Screen

The JONSBO Case series is designed to cater to the real needs of users. JONSBO products not only meet performance requirements but also complement the home décor on the desktop.

The wallpaper software "Wallpaper Engine" is recommended for an enhanced visual experience. Additionally, the "AIDA64 Extreme" hardware monitoring software is suggested (which needs to be purchased by the user).

The 1280x800 resolution / 8-inch screen has a pixel density of approximately 188ppi, surpassing the display accuracy of a 27-inch 4K monitor (around 162ppi). At the typical viewing distance of 50cm~70cm, the display will not produce a sense of pixelation, allowing various dynamic wallpaper effects to be seamlessly integrated.

The case can be completely disassembled and placed on the desktop, complementing the main display in a multi-tasking setup. A short vertical air duct is constructed for efficient heat dissipation, taking advantage of the natural rise of heat flow. The D31 supports up to 8 or 12CM fans (or 4 14CM+2 12CM fans), allowing for effective heat management.

Thanks to the relatively low case height, the vertical airflow from bottom to top quickly covers the heating components, and the internal heat is discharged from the top mesh. The power supply can be installed in a bidirectional orientation, with the air inlet facing the panel direction without interfering with the internal air duct under the air cooling setup.

The GPU length is affected by the power supply orientation. When three 12cm fans are installed on the top, the power supply can be positioned in the second hanging slot. If a 360AIO is installed on the top, it is recommended to use a 14cm power supply to accommodate a longer GPU. When the GPU length is less than 330mm, the power supply can be installed in the fourth hanging position.

Fan support: - Top: 120mm3 or 140mm2 (optional) - Rear: 120mm1 (optional) - Bottom: 120mm3 or 140mm2 (optional) - Front: 120mm1 (optional)

AIO support: - Top: 120/240/280/3601 - Rear: 1201 - Bottom: 120/240/360*1

Note: If there are any compatibility issues during installation, please contact customer service for solutions. (AIDA64 software needs to be purchased by users)

The D31 "Pine cone" series is a Mesh Screen PC Case with dimensions of 205363452mm, supporting MATX/MicroATX motherboards, GPUs up to 400mm, and ATX/SFX power supplies up to 220mm in length. It can accommodate air coolers up to 168mm high and supports AIO solutions up to 360/280/240 (Top) and 360/240 (Bottom).

product information: